Drainage in traffic route engineering
MULTI-inspect
PE-HD inspection and flushing chambers MULTI-inspect for traffic route engineering and for municipal construction works for the maintenance of surface water pipelines
Pipelines in roads and municipal building projects require regular inspection, flushing and maintenance. This maintenance work is mainly performed by camera and flushing technology with admission via non-accessible chamber systems. MULTI-inspect chamber systems meet the technical requirements and are perfectly matching with the connected HEGLER pipe systems.
The proper chamber system for every application
Each building measure has its own particular features. Therefore, the MULTI-inspect chamber systems are available in various designs and sizes as standard product or, tailored to the respective project, with individual connecting geometries. A basic distinction is made between the following systems:
Inspection chamber as straight-way version
▪ Primarily with storm water carrier lines, but also with pipelines in civil engineering drainage
Inspection chamber in pickaback arrangement
▪ Combined arrangement of carrier pipe with the highway drainage pipe connected above (pickaback arrangement)
| - MULTI-inspect 400 | Inspection and flushing chamber, up to nominal size DN 400 |
| - MULTI-inspect 600 | Inspection and flushing chamber, up to nominal size DN 400 |
| - MULTI-inspect 600 DUO | Inspection and flushing chamber, piggyback arrangement up to DN 400 |
| - MULTI-inspect MONO | Inspection and flushing chamber, up to nominal size DN 600 |
| - MULTI-inspect DUO | Inspection and flushing chamber, piggyback arrangement up to DN 600 |
Drainage in traffic route engineering
MULTI-inspect 400
PE-HD inspection and flushing chamber for traffic route construction and for special requirements up to maximum pipe diameters of DN 400
Application
The MULTI-inspect 400 chamber fits any applications in traffic road construction for the discharge of drain and surface water. Thanks to its compact dimensions, it is particularly suited in places difficult to access or in confined spaces like narrow medial strips, swales, or concrete walls.
- Leak-tight chamber system to DIN EN ISO 13259 and DIN EN 1610
- Monolithic chamber basic body of PE-HD
- Easily accessible for inspection and flushing
- Full-length even-level flow channel
- Internal dimension > 500 mm
- Chamber riser DU 400
- Size range DN 100 to DN 400
- Chamber basic body with two outlets 180° - project-specific special geometries on request
- Reducers DN 100 to DN 350 with locking mechanism (protected by patent)
- Settlement cams in the chamber rising coupling to avoid structural damage
-
Reliable connection of storm water and civil engineering drains
-
Suitable for SLW 60 classified roads
-
Narrow overall width
-
Small overall height of basic body of 0.65 m
-
Installation depth t ≥ 0.90 m (chamber bottom – upper edge top)
-
Ideal for use in cramped confines and small installation depths
-
Rupture- and crack-proof, even at low temperatures
-
Excellent abrasion resistance
- Low weight, easy site handling, simple assembly
- Ecologically friendly and recyclable
- Independent load distribution from chamber riser and basic body
- Chamber covers to DIN EN 124, classes B 125 and D 400
- Great variety of combinations
- Available as inlet chamber for swale drainage
- Long service life, high longevity of PE-HD
Download area
- Leaflets|
- Product specifications|
- Design drawings
Drainage in traffic route engineering
MULTI-inspect 600
PE-HD inspection and flushing chamber for traffic route construction up to maximum pipe diameters of DN 400
Application
As plain inspection and flushing chamber, the MULTI-inspect 600 can be installed in all areas of the road cross-section. Thanks to its small overall height, it is ideal for use as swale inlet chamber in the peripheral zones of a road, where it can be combined with any customary chamber cover (with or without grating) to DIN EN 124 (625 mm).
- Leak-tight chamber system to DIN EN ISO 13259 and DIN EN 1610
- Monolithic chamber basic body of PE-HD
- Easily accessible for inspection and flushing
- Full-length even-level flow channel
- Internal dimension > 600 mm
- Chamber riser DU 600
- Size range DN 100 to DN 400
- Chamber basic body with two outlets 180° - project-specific special geometries on request
- Reducers DN 100 to DN 350 with locking mechanism (protected by patent)
- Settlement cams in the chamber rising coupling to avoid structural damage
- Reliable connection of storm water and civil engineering drains
- Suitable for SLW 60 classified roads
- Small overall height of basic body of 0.75 m
- Installation depth t ≥ 1.00 m (chamber bottom – upper edge top)
- Ideal for use in cramped confines and small installation depths
- Rupture- and crack-proof, even at low temperatures
- Excellent abrasion resistance
- Low weight, easy site handling, simple assembly
- Ecologically friendly and recyclable
- Independent load distribution from chamber riser and basic body
- Customary chamber covers to DIN EN 124 (625 mm)
- Great variety of combinations
- Available as inlet chamber for swale drainage
- Long service life, high longevity of PE-HD
Download area
- Leaflets|
- Product specifications|
- Design drawings
Drainage in traffic route engineering
MULTI-inspect 600 DUO
PE-HD inspection and flushing chamber in pickaback arrangement for traffic route construction up to maximum pipe diameters of DN 400
Application
The MULTI-inspect 600 DUO is an inspection chamber allowing a pickaback arrangement of a carrier pipe for the discharge of surface water and a drainage pipe to take up the accumulating seepage water to guarantee professional drainage of the road subgrade. The arrangement of pipes in a pickaback layout combines technical and economic advantages both in the building and operating phases of road drainage systems.
- Combined connection of carrier and drainage pipes in pickaback arrangement
- Leak-tight chamber system to DIN EN ISO 13259 and DIN EN 1610
- Monolithic chamber basic body of PE-HD
- Easily accessible for inspection and flushing
- Full-length even-level flow channel
- Internal dimension > 600 mm
- Chamber riser DU 600
- Size range DN 100 to DN 400
- Chamber basic body with two outlets 180° - project-specific special geometries on request
- Reducers DN 100 to DN 350 with locking mechanism (protected by patent)
- Settlement cams in the chamber rising coupling to avoid structural damage
- Reliable connection of storm water and civil engineering drains
- Pickaback arrangement with a standard pipe distance of 15 cm
- Suitable for SLW 60 classified roads
- Small overall height of basic body of 1.06 m
- Installation depth t ≥ 1.32 m (chamber bottom – upper edge top)
- Ideal for use in cramped confines and small installation depths
- Rupture- and crack-proof, even at low temperatures
- Excellent abrasion resistance
- Low weight, easy site handling, simple assembly
- Ecologically friendly and recyclable
- Independent load distribution from chamber riser and basic body
- Customary chamber covers to DIN EN 124 (625 mm)
- Great variety of combinations
- Available as inlet chamber in swale drainage
- Long service life, high longevity of PE-HD
Download area
- Leaflets|
- Product specifications|
- Design drawings
Drainage in traffic route engineering
MULTI-inspect MONO
PE-HD inspection and flushing chamber with internal dimension > 900 mm for traffic route construction up to maximum pipe diameters of DN 600
Application
An inspection and flushing chamber for the connection of pipes up to maximum diameters of DN 600, the MULTI-inspect MONO completes the range of chambers. Its fields of application in traffic route construction are comparable to those of the MULTI-inspect 400 and 600 chambers. Customary chamber covers/gratings to DIN EN 124 (625 mm) match with the chamber riser DU 600.
- Leak-tight chamber system to DIN EN ISO 13259 and DIN EN 1610
- Monolithic chamber basic body of PE-HD
- Easily accessible for inspection and flushing
- Full-length even-level flow channel
- Internal dimension > 900 mm
- Chamber riser DU 600
- Size range DN 100 to DN 600
- Chamber body with two outlets 180° - project-specific special geometries on request
- Reducers DN 100 to DN 350 with locking mechanism (protected by patent)
- Settlement cams in the chamber rising coupling to avoid structural damage
- Reliable connection of storm water and civil engineering drains
- Suitable for SLW 60 classified roads
- Overall height of basic body ≤ DN 400 = 0.75 m (DN 500 = 1.12 m/DN 600 = 1.23 m)
- Installation depth t for ≤ DN 400 ≥ 1.00 m (DN 500 ≥ 1.42 m/DN 600 ≥ 1.52 m)
- Ideal for use in cramped confines and small installation depths
- Rupture- and crack-proof, even at low temperatures
- Excellent abrasion resistance
- Low weight, easy site handling, simple assembly
- Ecologically friendly and recyclable
- Independent load distribution from chamber riser and basic body
- Customary chamber covers to DIN EN 124 (625 mm)
- Great variety of combinations
- Available as inlet chamber for swale drainage
- Long service life, high longevity of PE-HD
Download area
- Leaflets|
- Product specifications|
- Design drawings
Drainage in traffic route engineering
MULTI-inspect DUO
PE-HD inspection and flushing chamber with internal dimension > 900 mm in pickaback arrangement for traffic route construction up to maximum pipe diameters of DN 600
Application
An inspection and flushing chamber in pickaback arrangement for the connection of pipes up to maximum diameters of DN 600, the MULTI-inspect DUO completes the range of this type of chambers. The discharge of surface water and collection of accumulating seepage water via chambers in pickaback arrangement meets the requirements in drainage engineering according to the state of the art. By the extended size range up to DN 600, a wide field of applications is covered, even for extensive building projects in main and federal roads.
- Combined connection of carrier and drainage pipes in pickaback arrangement
- Leak-tight chamber system to DIN EN ISO 13259 and DIN EN 1610
- Monolithic chamber basic body of PE-HD
- Easily accessible for inspection and flushing
- Full-length even-level flow channel
- Internal dimension > 900 mm
- Chamber riser DU 600
- Size range DN 100 to DN 600
- Chamber basic body with two outlets 180° - project-specific special geometries on request
- Reducers DN 100 to DN 350 with locking mechanism (protected by patent)
- Settlement cams in the chamber rising coupling to avoid structural damage
- Reliable connection of storm water and civil engineering drains
- Pickaback arrangement with a standard distance of 15 cm
- Suitable for SLW 60 classified roads
- Overall height of chamber basic body ≤ DN 400 = 1.06 m (DN 500 = 1.12 m/DN 600 = 1.23 m)
- Installation depth t für ≤ DN 400 ≥ 1.32 m (DN 500 ≥ 1.42 m/DN 600 ≥ 1.52 m)
- Ideal for use in cramped confines and small installation depths
- Rupture- and crack-proof, even at low temperatures
- Excellent abrasion resistance
- Low weight, easy site handling, simple assembly
- Ecologically friendly and recyclable
- Independent load distribution from chamber riser and basic body
- Customary chamber covers to DIN EN 124 (625 mm)
- Great variety of combinations
- Available as inlet chamber in swale drainage
- Long service life, high longevity of PE-HD
Download area
- Leaflets|
- Product specifications|
- Design drawings