Drainage in Traffic Route Engineering
AQUADRAIN
Civil engineering drainage system to DIN 4262-1, Type R2 (SN 8)
PE-HD civil engineering drainage system with profiled outer wall to DIN 4262-1, Type R2 for special requirements – ring stiffness class SN 8
Application
Civil engineering drainage pipe for professional drainage in the construction of highways, country and municipal connecting roads as well as structural facilities with special requirements for high ring stiffness. AQUADRAIN is available as locally perforated pipe, totally perforated pipe and multi-purpose pipe, all of PE-HD, in accordance with DIN 4262-1, Type R2.
- PE-HD twin wall pipe to DIN 4262-1, Type R2
- Size range from DN 150 to DN 600
- Outside corrugated/inside smooth
- High ring stiffness S ≥ 8.0 kN/m2 to DIN EN ISO 9969 (SN 8)
- Available slotting patterns:
- locally perforated pipe (LP)
- multi-purpose pipe (MP)
- totally perforated pipe (TP)
- Large water inlet area > 50 cm2/m
- Slot width 1.2 mm +/- 0.4 mm or 2.5 mm +/- 0.4 mm (depending on pipe diameter)
- Quality-assured by SKZ
- Suitable for SLW 60 classified roads
- For use in low and high installation depths
- Ideal in combination with chamber systems MULTI-inspect and SIRO-inspect
- Resistant to high-pressure flushing to DIN 19523
- Temperature-resistant from -20 °C to +80 °C
- Clean-edged water inlets thanks to special HEGLER slotting technique
- Smooth in terms of hydraulics
- Long service life
- Easy handling
- Low weight
- High impact resistance – rupture-proof, even at low temperatures
- Proven inspection possibility
- Extensive range of accessories
Size range
| Nominal size | DN | 150 | 200 | 250 | 300 | 400 | 500 | 600 |
|---|---|---|---|---|---|---|---|---|
| Outside diameter | (mm) | 174.8 | 234.9 | 293.5 | 352.9 | 464.0 | 579.5 | 691.9 |
| Inside diameter | (mm) | 153.3 | 197.5 | 253.0 | 303.5 | 396.0 | 498.0 | 595.0 |
Download area
- Leaflets|
- Product specifications|
- Design drawings